As we all know, the rotary encoder is an encoder, rotary encoder can be used to measure the rotational speed of machinery, mechanical devices can also speed, sometimes mechanical processing speed needs to be changed, you can use the rotary encoder to work, then the rotary encoder how to install it?
　　Mounting the rotary encoder can be divided into two areas, a factor is taken into account electrical aspects, to the assembly when the cable shield wires.
First, the installation of the rotary encoder to be optimistic about the instructions, the equipment for a detailed inspection, check the model instructions on the product, in particular, whether the interface wiring and size of the product, respectively.
Second, if the long-distance transport, taking into account the reasons for signals with the length of the distance varies, and this time should choose a low impedance, and has a strong anti-jamming capability models. Again, with the electrical aspects of the encoder can not be used where strong electromagnetic waves.
　　Of course, also pay attention to the environment, because the encoder is a precision instrument at the time of installation to note whether the surrounding environment can meet the basic requirements, pay attention to the surrounding environment for interference factors such as vibration source so as not to interfere with the work of the encoder, but also pay attention to protecting the encoder machines do not come into contact with water or liquid, under certain conditions need to add protective cover, the encoder used, the environmental temperature and humidity are to be considered external conditions .
　　Finally, at the time of installation, but also pay attention to the mechanical aspects of the content, it can withstand the maximum axle load is a very important part, at the same time, the number of axes is also a more basic issue, the angle of the shaft axis and should be in when the encoder belonging to electronic machinery, so the time of installation to be careful not to knock or hit the floor with a hard object, the other before installing it to check whether the machine is screwed in order to work; within the appropriate range to run smoothly.
　　The above description of the knowledge rotary encoder installation, I believe we structure the encoder mounted to note problems with a general understanding in the use of the encoder when the necessary issues are taken into account, so that you can safely The encoder operation.